PE welding machine

This product has a precise temperature control, high reliability, security, and unique non-stick plastic mold technology, user-f

A summarized1, the device can make polyethylene (referred to as PE) pipe end, planing, heating, melting one, under manual pressure to achieve the purpose of connection.2, the required power of the machine must be single-phase power supply 198V-242V range and reliable grounding.3, the CK-type specifications technical indicators

 

Specifications   welding machine electrical power (KW)                                  Size (mm)63-160                                              2.6                                                        63,75,90,110,125,140,160

4, the operator to prevent burns from heating plate and the cutting knife injury5, the machine in accordance with the manual operation, no man-made damage under the premise, free warranty for one year motor warranty for three months, the surface coating of the heating plate is not a warranty coverage.6, such as the construction of the machine fails or can not solve the situation, please contact us and we will give you the first time, thank youSecond, the operation1, the preparatory work(1) a clean cloth to wipe dust and dirt, while the heating plate to extend the service life.(2) heating plate. Cutter on the rack attachments and connect the power.(3)loaded weld tube corresponding tiles, spin it tightly, do not apply.2, the planing(1)The pipe the child does not move side on the rack does not move the shelves to move the shelves of the moving end of the tube on the rack.(2)In the clamping to be pipe midnight, you should try to ensure that the two tubes straight, it is especially important. Rotating tile screws, tighten to Do not apply excessive force, eye observation clamping at the tube less deformation. The head of the two tubes stay 3cm ~ 5cm length so that planing.(3) the cutter into the rack, an open cut of the knife switch, and hold the cutting knife, the other with hands smooth the nudge tube planing to be planing the material into a continuous like a customs cutter switch another person to pull the tube, remove the cutter.(4)push to close the tube, to check whether two face match, if not consistent, repeat "operation cutting (1) (3)3, weld(1)Set the temperature of the heating plate hot melt, check the heating plate of red, green alternate, to be lit to transform complete then the heating plate in the state of the normal operating temperature, you can work.(2) heating plate into the rack, his hands steady and rapid advance of pipe, two pipe ends are consistent with the heating plate immediately, vigorously pushed for 1 minute, pushing with a small 1.5 minutes, and then vigorously pushed for about 1 minutes to see the emergence of the tube-side flange height of 0.5cm, immediately pull the tube was quickly removed the electric hot plate, rapidly advancing the tube vigorously push let go after one minute, until the pipe cooling, remove the tube, the weld is completed.

PE welding machine